• 32 wireless zones
• 8 wireless keyfobs
• 4 wireless keypads
• 32 user codes
• 256 event log with time/date stamp
• Programmable output
• Full, Part and Perimeter arming modes- with separate Entry/Exit delays and Arm/Disarm tones
• Built-in LCD (2 row x 16 character) with user friendly menu driven interface
• Custom end-user descriptors for each user, zone, HA device and SMS message
• Wide range of supervised FM transmitters, with high security data encryption
• Built-in sounder
• Built-in Two-Way-Audio including one-touch Service Call button
• Installer friendly utilities - transmitter signal strength, smart walk test, transmitter status list, remote transmitter deletion
• Off-site high speed remote programming
• Automatic recognition of new system hardware
• European standard 868MHz

Complete infrared security system, which is simple to install, allowing low cost monitoring of door or walkway, announcing intruder or customer. Ideal for shops, offices, warehouses and receptions.

·          Alarm or chime setting

·          Retro-reflection IR photoelectric beam sensor

·          Adjustable activation time (3-30 sec) and volume

·          Nominal detection range 7m

·          1 second duration for chime, 30 seconds for alarm

·          9V dc, 200mA power supply included

• 32 wireless zones
• 8 wireless keyfobs
• 4 wireless keypads
• 32 user codes
• 256 event log with time/date stamp
• Programmable output
• Hardwire zone
• Full, Part and Perimeter arming modes- with separate Entry/Exit delays and Arm/Disarm tones
• Built-in LCD (2 row x 16 character) with user friendly menu driven interface
• Custom end-user descriptors for each user, zone, HA device and SMS message
• Custom system banner
• Wide range of supervised FM transmitters, with high security data encryption
• Built-in sounder
• Built-in Two-Way-Audio including one-touch Service Call button
• Installer friendly utilities - transmitter signal strength, smart walk test, transmitter status list, remote transmitter deletion
• Off-site high speed remote programming
• Automatic recognition of new system hardware
• European standard 868MHz

• One-touch Full/Part/Perimeter arm and disarm
• Panic alarm function
• 9V alkaline battery powered
• Battery status indicator
• Built in sounder

• Compact, sleek design
• 4 buttons, 5 functions (3 Arm modes, Disarm, Home Automation on/off, panic)
• LED transmission indication
• Fixed transmission time guards against battery drainage

• Water resistant
• Pendant / Keychain option
• Aesthetic design
• LED transmission indication
• Fixed transmission time guards against battery drainage

• 15m x 15m/50' x 50' coverage
• Lithium battery powered with very low current consumption (6µA standby)
• Adaptive temperature compensation
• Selectable pulse count and led indicator
• Superior RFI/EMI immunity
• Dual randomised transmission

• 11m x 11m/35' x 35' coverage
• ASIC-based
• 23kg/50lb. Full area vision pet immunity
• Lithium battery powered with very low current consumption (6µA standby)
• Adaptive temperature compensation
• Selectable pulse count and led indicator
• Superior RFI/EMI immunity
• Dual randomised transmission

• Compact, aesthetic design
• Wired Alarm input
• Lithium battery powered with very low current consumption (7µA standby)

• Photoelectric smoke sensor
• Powered by one 9V battery for the smoke sensor and built-in transmitter
• Audible low battery indicator
• LED indication

Provides full power requirements and a secure wirefree connection for virtually any external siren assembly.

• Compatible with virtually all external sounders.
• 13.8vdc output.
• Wirefree connection to panel
• Plug in power supply
• 12vdc back up battery.
• NB Sounder not included

Self monitoring of the alarm system is possible by using this module. Essentially a DTMF dialler that can easily be programmed to dial up to three numbers to a land line or mobile phone, either after an alarm event or upon manual request from the system user. When a call is received from the system the answering party can enter a pre-agreed code which opens two way speech communication via the panels on board speaker and microphone, particularly useful if the system is used as an emergency contact system for the elderly or infirm.

In addition to self monitoring the module can be used to access our dedicated 24hour monitoring service. This module can also be used to connect to virtually all central stations that receive contact ID or SIA protocols.

• Connects hard wire equipment to Infinite system
• Long life Lithium battery
• Compact design

• Remotely controls Home Automation functions
• Hand held portability
• Perform system commands from around the premises - Arm/Disarm, Home Automation, Panic
• Ergonomic, aesthetic design
• Wall mount option
• 9V alkaline battery powered
• Battery status indicator

Wirefree 3 zone alarm. RF remote key fob. Audio indication when you arm/disarm. Panic button. Anti-tamper circuit. PIR sensor have a 12m detection range. Transmission range of RF signals up to 33m. Kit includes dual power control panel(Solar and battery), siren with strobe, key fob, door contact, 1 PIR sensor and batteries. Can be expanded with R F accessories.

• 100% wire free NO connecting wires
• Easy to install in less than an hour
• The siren is weatherproof
• Alarm is triggered if tampered with
• Includes a panic button facility on keyfob
• Battery operated with low life indicator
• 1 year guarantee
• Can be expanded as required

Wirefree 3 zone alarm. Ideal for properties with up to 4 bedrooms. RF remote keypad (Removable). RF remote key fob. Audio indication when you arm/disarm. Panic button. Anti-tamper circuit. PIR sensors have a 12m detection range. Transmission range of RF signals up to 33m. Kit includes dual power control panel(Solar and battery), siren with strobe, key fob, door contact, 2 PIR sensors and batteries. Can be expanded with R F accessories.

• 100% wire free NO connecting wires
• Easy to install in less than an hour
• The siren is weatherproof
• Alarm is triggered if tampered with
• Includes a panic button facility on keyfob
• Battery operated with low life indicator
• 1 year guarantee
• Can be expanded as required

Autodialler system will automatically call up to 9 different phone numbers if alarm is triggered. Kit contains  2 x wirefree PIR sensors, 1 x wirefree door/windowsensor, external dual power siren and strobe, 1 x wirefree remote keyfob, 1 x autodialler and 1 x 3 zone control panel

DIY installation - no wiring required. Fully expandable. Anti tamper switch. Key fob operation with panic button. Long battery life (batteries included). 100 decibel (approx.) external sounder with power LED. 2 wirefree PIR sensors, 1 wirefree door/window contact sensor, internal siren control panel, remote key fob with arm/disarm/panic settings. Battery powered (6 D Cell supplied). Can be expanded with R F accessories.

• 100% wire free NO connecting wires
• Easy to install in less than an hour
• The siren is weatherproof
• Alarm is triggered if tampered with
• Includes a panic button facility on keyfob
• Battery operated with low life indicator
• 1 year guarantee
• Can be expanded as required

For use with NS084, NS121 or NS461

For use with NS084, NS121 or NS461

• WIRELESS KEY FOB TRANSMITTER 
• UP TO 30 METRES TRANSMISSION RANGE
• 10 BIT DIPSWITCH FOR INDIVIDUAL CODE SETTINGS
• ON/OFF PANIC ALARM PANEL
• 12V BATTERY INCLUDED