TIMERS

7 DAY ELECTRIC WALL SWITCH TIMER

NS292

Larger picture

Replaces existing light switch (either 1 or 2 way). Operates with up to 6 on/off programmes Daily, weekly and weekday/weekend programmes available. Digital timer with 24 hours battery back up. Simple touch control. Easy to fit. Minimum load 40W, maximum load 400W. Not suitable for fluorescent lamps

TIMER TIME-LAG SWITCH

D23

1 OR 2 WAY TIME DELAY SWITCH. Pneumatic time lag switch. Flush plate mounting. White. Adjustable 30secs to 10 minutes. Can be used for incadescent or fluorescent lighting. Neutral not required. Will replace existing switch. 6a load. 3a fluorecent and inductive loads.

TOUCH TIME DELAY SWITCH

NS263

Larger picture

Up to 10 mins max. Adjustable time period. 1 way operation. Touch timer switch or PIR initiated switch. 0.4a load

TIMER 24HR PLUG-IN

D21

Larger picture

Suitable for many domestic security and appliance switching applications. Attractively styled with manual override and multi selection removable tappets. Plugs into standard British 13 amp. socket and is protected by mandatory sleeved pins.

TIMER 24HR IMMERSION

D22

MANUAL OVER-RIDE SWITCH

PLUG-IN DAILY WEEKLY ELECTRONIC TIMER

NS262

Special Purchase

Larger picture

Daily/weekly electronic timer Up to 8 on/off switches per day Automatic random on/off switching Minimum switching time of 1 min. Rechargeable battery back up Manual override LCD display

One Gang Isolated Timer & Socket

NS118

Larger picture

Complies with BS1363.
Suitable for all BS 13 amp plugs.
Switches ON and OFF at preset times.
Easy to use captive segment dial.
15 minute switching interval which can be increased in 15 minute steps.
Manual override.
Up to 48 ON & OFF programmes daily.
Impact resistant housing.
Locking boss feature.
Mains isolator switch to isolate supply before lid can be opened.

7 Day Fused Spur Timeswitch

LL203

Larger picture

Features individual day, everyday, every weekday or weekend programme selections over a 7 day period. Six programmes are available, and if each one is selected to operate over all 7 days, 42 ON & OFF switching per week will result. For use with all convector and electronic panel heaters.

Switched and switched/timed outputs.
Simple two button programming.
Manual override until next programme change.
Integral double pole switch and BS1362 fuse.
Shortest switching time 1 minute.
1000 hours rechargeable memory back up.

Electronic Countdown Plug

DX33

Larger picture

Simply re-wire to your appliance like a normal plug.

Set the time you need for the task in hand e.g. the ironing. When the time runs out, the countdown Plug will switch your appliance off

Suitable for irons, small heaters, hair straighteners and soldering irons. Simply push to set length of time you need (20, 40 or 60 mins)

When the minutes run out, the plug will beep then turn your appliance off, in case you forget

230V AC. 13A (3kW) resistive load. 2A Inductive

High Ouput Run Back Timer suitable for operating Heating

D27

Larger picture

The RBT run back timer is a high output electronic timer which provides control for a wide range of loads. Its powerful 20A output makes it particularly suitable for the control of lighting, ventilation and heating. The unit allows an appliance to be powered for a set time period which can be adjusted by the user. A simple display shows the user how much time is left to run. An ON/OFF switch allows the user to cancel the timing program whilst a memory remembers the last timing sequence selected.

20 Amp rating at 230VAC (resistive)
6Amp rating at 230VAC (inductive)
ON/OFF Switch for time cancellation
Adjustable between 15min and 2hours
ON/OFF Switch for time cancellation